Atlas Copco GA 90 + – 160 + (50 Hz) Screw Air Compressors

High-efficiency GA+ series compressors use intelligent fuel injection technology, IE4/IE5 oil-cooled motors; integrated design of the motor and the machine head, the protection level is up to IP66. The high-efficiency transmission system, coupled with a cooling system with a large margin design, a low-pressure loss piping system and the Elektronikon®Touch precise control system greatly reduce the overall energy consumption of the compressor. Reliable transmission system of GA+ series compressors

Efficient

GA+ series compressor adopts intelligent fuel injection technology, IE4/IE5 oil-cooled motor; the motor and the machine head are integrated design, and the protection level is up to IP66. Efficient transmission system, with cooling system with large margin design, low pressure loss piping system and Elektronikon®Touch precise control system, greatly reduce the overall energy consumption of the compressor.

Reliable
The protection level of the transmission system of the GA+ series compressor reaches IP66, which prevents the erosion of dust and water vapor in the environment, and allows the unit to operate stably under harsh working conditions (up to 55°C ambient temperature).

Easy maintenance
All parts that require regular maintenance are fully considered for the convenience of operation, which greatly reduces the time required for maintenance. The unique box plate design makes all the parts inside the unit within easy reach. At the same time, the design of each component also fully considers its maintainability. Compared with the traditional design, the average maintenance time is shortened by more than half.

Models No.	Maximum Working Pressure				FAD			Motor Capacity	Outlet Diameter	Outlet Diameter
	Standard		Full Featured		Standard					Standard		Full Featured
	bar(e)	psig	bar(e)	psig	l/s	m3/min	cfm	kw		kg	lbs	kg	lbs
GA90+ – 5.5	5.5	80	5.3	77	354	21.3	750	90	G 3”	2721	5999	2971	6550
GA90+ – 7.5	7.5	109	7.3	106	297	17.8	629
GA90+ – 8.5	8.5	123	8.3	120	283	17	600
GA90+ – 10	10	145	9.8	142	258	15.5	547
GA110+ – 5.5	5.5	80	5.3	77	426	25.5	901	110	G 3”	6177	6177	3052	6728
GA110+ – 7.5	7.5	109	7.3	106	369	22.2	782
GA110+ – 8.5	8.5	123	8.3	120	346	20.8	734
GA110+ – 10	10	145	9.8	142	315	18.9	667
GA132+ – 5.5	5.5	80	5.3	77	503	30.2	1065	132	G 3”	6360	6360	3135	6911
GA132+ – 7.5	7.5	109	7.3	106	441	26.5	934
GA132+ – 8.5	8.5	123	8.3	120	414	24.8	877
GA132+ – 10	10	145	9.8	142	381	22.9	807
GA160+ – 7.5	7.5	109	7.3	106	526	31.6	1114	160	G 3”	6532	6532	3213	7083
GA160+ – 8.5	8.5	123	8.3	120	495	29.7	1048
GA160+ – 10	10	145	9.8	142	459	27.5	972

(1) Unit performance parameters are measured according to ISO 1217, Appendix C, Version 4 (2009).
Reference conditions:
-The absolute inlet pressure is 1bar (14.5 psi).
-The intake air temperature is 20°C (68°F).
(2) Built-in refrigeration dryer (FF): The pressure dew point is 3°C (37°F) under reference conditions.

FAD(1) is measured under the following working pressures:

	Standard	Full Featured
5.5bar Model	5 bar	5 bar
7.5bar Model	7 bar	7 bar
8.5bar Model	8 bar	8 bar
10 bar Model	10 bar	9.8 bar

Size

	L	W	H
	mm	mm	mm
GA 90+-160+	2500	1785	2020
GA 90+-160+ FF	2900	1785	2020

Chengdu Air Compressors supplier Chengdu Pudding Mechatronic Co. CPMC authored this release about Atlas Copco Air Compressors. If you are looking for a supplier based in China for air compressors and the related spare parts, pipping systems, woodworking tools, please feel free to contact us by email to sales@aircompressorstrade.com.