Overview
The function of Sullair oil filter:
The oil filter is used to filter out the impurities in the lubricating oil to ensure that the clean lubricating oil enters the working cavity of the main engine and each lubrication point. If the lubricating oil contains impurities, it will cause the wear of the rotor profile, gear meshing surface and bearings, and reduce the life of the compressor. The filter element of the oil filter should be replaced regularly to ensure the smooth flow of the oil path. There is a differential pressure sensor on the top of the oil filter. When the pressure difference before and after the filter element exceeds the set pressure (0.14MPa), the monitor panel will display a maintenance signal (OIL FILTER MAINT REQD) to remind the unit operator to replace the filter element in time.
Features of Sullair Oil Filter
1. Aviation quality filter material provides better filtering effect.
2. The dirt holding capacity is more than 2 times that of ordinary filter media.
3. The waste filter is easy to deal with, and the processing cost is low.
4. The oil filter uses environmentally friendly materials with a filtration accuracy of more than 99.5%.
Maintenance of Sullair oil filter
When the monitor sends out the maintenance signal of the oil filter (△P2 light flashes on the panel), the operator should maintain the oil filter and replace the filter element in time. Maintenance worker should pay attention to the following steps.
Follow the steps below for replacing the oil filter
1. Use a strap wrench to remove the filter element and O-ring.
2. Clean the sealing surface.
3. Put a layer of clean compressor oil on the O-ring of the new filter element.
4. Replace and tighten the new filter element.
5. Turn on the machine and check whether there is oil leakage.
Note that the filter element is Sullair and cannot be replaced by other products. The filter element can only be replaced, not cleaned.
Sullair oil filter replacement cycle
The following four items are limited to first arrival.
(1) Every 1000 hours.
(2) ΔP2 alarm, the pressure difference exceeds 20psig (1.4bar).
(3) Every six months.
(4) Change the oil every time.
The harm of counterfeit Sullair oil filter oil filter
1. The oil filter has poor precision. Large particles enter the machine head through the oil filter, which will cause the machine head to wear, high temperature, noise, vibration, and even jam.
2. The quality of the filter material is poor, and the filter material is damaged and blocked in a short time, causing the machine head to be stuck due to lack of oil.
3. Poor sealing material causes oil leakage and is difficult to repair.
Purchase with CPMC to expect Genuine Sullair parts with better prices!
Unlike those middle handlers who sell Sullair air compressors parts on Alibaba.com, Aliexpress, or Globalsources, eBay, Amazon, etc, Chengdu Pudding Mechatronic Co.CPMC has our own professional website.This helps save a big burden for overseas buyers, because third party platform like Alibaba or eBay, Amazon, Globalsources, etc charges high commission fee and system maintenance fee to their online agent. Here with CPMC, we are confident to offer 5-10% cheaper than any purchase on Alibaba.
Reviews
There are no reviews yet.